Hazardous Waste
Hazardous-Waste Management
The collection, treatment, and disposal of waste material that, when improperly handled, can cause substantial harm to human health and safety or to the environment. Hazardous wastes can take the form of solids, liquids, sludges, or contained gases, and they are generated primarily by chemical production, manufacturing, and other industrial activities. They may cause damage during inadequate storage, transportation, treatment, or disposal operations. Improper hazardous-waste storage or disposal frequently contaminates surface water and groundwater supplies as harmful water pollution and can also be a source of dangerous land pollution. People living in homes built near old and abandoned waste disposal sites may be in a particularly vulnerable position. In an effort to remedy existing problems and to prevent future harm from hazardous wastes, governments closely regulate the practice of hazardous-waste management.
Hazardous-Waste Characteristics
Hazardous wastes are classified on the basis of their biological, chemical, and physical properties. These properties generate materials that are either toxic, reactive, ignitable, corrosive, infectious, or radioactive.
Toxic wastes are poisons, even in very small or trace amounts. They may have acute effects, causing death or violent illness, or they may have chronic effects, slowly causing irreparable harm. Some are carcinogenic, causing cancer after many years of exposure. Others are mutagenic, causing major biological changes in the offspring of exposed humans and wildlife.
Reactive wastes are chemically unstable and react violently with air or water. They cause explosions or form toxic vapours. Ignitable wastes burn at relatively low temperatures and may cause an immediate fire hazard. Corrosive wastes include strong acidic or alkaline substances. They destroy solid material and living tissue upon contact, by chemical reaction.
Infectious wastes include used bandages, hypodermic needles, and other materials from hospitals or biological research facilities.
Radioactive wastes emit ionizing energy that can harm living organisms. Because some radioactive materials can persist in the environment for many thousands of years before fully decaying, there is much concern over the control of these wastes. However, the handling and disposal of radioactive material is not a responsibility of local municipal government. Because of the scope and complexity of the problem, the management of radioactive waste—particularly nuclear fission waste—is usually considered an engineering task separate from other forms of hazardous-waste management and is discussed in the article nuclear reactor.
Transport of Hazardous Waste
Hazardous waste generated at a particular site often requires transport to an approved treatment, storage, or disposal facility (TSDF). Because of potential threats to public safety and the environment, transport is given special attention by governmental agencies. In addition to the occasional accidental spill, hazardous waste has, in the past, been intentionally spilled or abandoned at random locations in a practice known as “midnight dumping.” This practice has been greatly curtailed by the enactment of laws that require proper labeling, transport, and tracking of all hazardous wastes.
Transport Vehicles
Hazardous waste is generally transported by truck over public highways. Only a very small amount is transported by rail, and almost none is moved by air or inland waterway. Highway shipment is the most common because road vehicles can gain access to most industrial sites and approved TSDFs. Railroad trains require expensive siding facilities and are suitable only for very large waste shipments.
with capacities up to about 34,000 litres (9,000 gallons). They also can be containerized and shipped in 200-litre (55-gallon) drums. Specifications and standards for cargo tank trucks and shipping containers are included in governmental regulations.
The Manifest System
In the United States and other countries a key feature of regulations pertaining to waste transport is the “cradle-to-grave” Manifest system, which monitors the journey of hazardous waste from its point of origin to the point of final disposal. The manifest system helps to eliminate the problem of midnight dumping. It also provides a means for determining the type and quantity of hazardous waste being generated, as well as the recommended emergency procedures in case of an accidental spill. A manifest is a record-keeping document that must be prepared by the generator of the hazardous waste, such as a chemical manufacturer. The generator has primary responsibility for the ultimate disposal of the waste and must give the manifest, along with the waste itself, to a licensed waste transporter. A copy of the manifest must be delivered by the transporter to the recipient of the waste at an authorized TSDF. Each time the waste changes hands, a copy of the manifest must be signed. Copies of the manifest are kept by each party involved, and additional copies are sent to environmental agencies.
Treatment, Storage, and Disposal
Several options are available for hazardous-waste management. The most desirable is to reduce the quantity of waste at its source or to recycle the materials for some other productive use. Nevertheless, while reduction and recycling are desirable options, they are not regarded as the final remedy to the problem of hazardous-waste disposal. There will always be a need for treatment and for storage or disposal of some amount of hazardous waste.
Treatment
Hazardous waste can be treated by chemical, thermal, biological, and physical methods. Chemical methods include ion exchange, precipitation, oxidation and reduction, and neutralization. Among thermal methods is high-temperature incineration, which not only can detoxify certain organic wastes but also can destroy them. Special types of thermal equipment are used for burning waste in either solid, liquid, or sludge form. These include the fluidized-bed incinerator, multiple-hearth furnace, rotary kiln, and liquid-injection incinerator. One problem posed by hazardous-waste incineration is the potential for air pollution.
Biological treatment of certain organic wastes, such as those from the petroleum industry, is also an option. One method used to treat hazardous waste biologically is called landfarming. In this technique the waste is carefully mixed with surface soil on a suitable tract of land. Microbes that can metabolize the waste may be added, along with nutrients. In some cases a genetically engineered species of bacteria is used. Food or forage crops are not grown on the same site. Microbes can also be used for stabilizing hazardous wastes on previously contaminated sites; in that case the process is called bioremediation.
The chemical, thermal, and biological treatment methods outlined above change the molecular form of the waste material. Physical treatment, on the other hand, concentrates, solidifies, or reduces the volume of the waste. Physical processes include evaporation, sedimentation, flotation, and filtration. Yet another process is solidification, which is achieved by encapsulating the waste in concrete, asphalt, or plastic. Encapsulation produces a solid mass of material that is resistant to leaching. Waste can also be mixed with lime, fly ash, and water to form a solid, cementlike product.
Surface Storage and Land Disposal
Hazardous wastes that are not destroyed by incineration or other chemical processes need to be disposed of properly. For most such wastes, land disposal is the ultimate destination, although it is not an attractive practice, because of the environmental risks involved. Two basic methods of land disposal include landfilling and underground injection. Prior to land disposal, surface storage or containment systems are often employed as a temporary method.
Temporary on-site waste storage facilities include open waste piles and ponds or lagoons. New waste piles must be carefully constructed over an impervious base and must comply with regulatory requirements similar to those for landfills The piles must be protected from wind dispersion or erosion. If leachate is generated, monitoring and control systems must be provided. Only noncontainerized solid, nonflowing waste material can be stored in a new waste pile, and the material must be landfilled when the size of the pile becomes unmanageable.
A common type of temporary storage impoundment for hazardous liquid waste is an open pit or holding pond, called a lagoon. New lagoons must be lined with impervious clay soils and flexible membrane liners in order to protect groundwater. Leachate collection systems must be installed between the liners, and groundwater monitoring wells are required. Except for some sedimentation, evaporation of volatile organics, and possibly some surface aeration, open lagoons provide no treatment of the waste. Accumulated sludge must be removed periodically and subjected to further handling as a hazardous waste.
Many older, unlined waste piles and lagoons are located above aquifers used for public water supply thus posing significant risks to public health and environmental quality. A large number of these old sites have been identified and scheduled for cleanup, or remediation, around the world.
Secure Landfills
Landfilling of hazardous solid or containerized waste is regulated more stringently than landfilling of municipal solid waste Hazardous wastes must be deposited in so-called secure landfills which provide at least 3 metres (10 feet) of separation between the bottom of the landfill and the underlying bedrock or groundwater table. A secure hazardous-waste landfill must have two impermeable liners and leachatecollection systems. The double leachate collection system consists of a network of perforated pipes placed above each liner. The upper system prevents the accumulation of leachate trapped in the fill, and the lower serves as a backup. Collected leachate is pumped to a treatment plant. In order to reduce the amount of leachate in the fill and minimize the potential for environmental damage, an impermeable cap or cover is placed over a finished landfill.
A groundwater monitoring system that includes a series of deep wells drilled in and around the site is also required. The wells allow a routine program of sampling and testing to detect any leaks or groundwater contamination. If a leak does occur, the wells can be pumped to intercept the polluted water and bring it to the surface for treatment.
One option for the disposal of liquid hazardous waste is deep-well injection, a procedure that involves pumping liquid waste through a steel casing into a porous layer of limestone or sandstone. High pressures are applied to force the liquid into the pores and of the rock, where it is to be permanently stored. The injection zone must lie below a layer of impervious rock or clay, and it may extend more than 0.8 km (0.5 mile) below the surface. Deep-well injection is relatively inexpensive and requires little or no pretreatment of the waste, but it poses a danger of leaking hazardous waste and eventually polluting subsurface water supplies.